• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar
  • Skip to footer
  • Skip to navigation
Close Ad

The Spoon

Daily news and analysis about the food tech revolution

  • Home
  • Podcasts
  • Events
  • Newsletter
  • Connect
    • Custom Events
    • Slack
    • RSS
    • Send us a Tip
  • Advertise
  • Consulting
  • About
The Spoon
  • Home
  • Podcasts
  • Newsletter
  • Events
  • Advertise
  • About

3d printing

April 1, 2019

For Cultured Meat, Scaffolding is the Next Big Hurdle. Could LEGOs Hold the Answer?

As of now, cultured meat comes out looking one way: like mush. That’s because scientists have figured out ways to replicate animal muscle, fat, and tissue cells, but not how to make them grow to make fibers. In short, we can grow a hamburger, but not something like a steak, which requires a more solid physical form.

But scientists are working to change this, developing scaffolding technology to help those muscle cells grow in formations that would mimic the chew of pork chops, chicken strips, and, of course, steak.

Most recently — and most exciting to my inner five-year-old — is the LEGO method. Researchers from Penn State have developed a new technique to spin cornstarch fibers into an edible scaffold using LEGO pieces. The scaffold could then, at least theoretically, be used to grow cultured meat.

According to Dr. Gregory Ziegler, a food science professor at Penn State who’s been working on the project, to make the scaffold they use a technique called “electrospinning,” where scientists apply electricity to an edible starch solution as it dispenses from a nozzle, creating long threads that adhere to a LEGO “mat”. Ziegler told me that they chose to use LEGO pieces because they’re cheap and also plastic, so they don’t conduct electricity.

They’ve been developing the technique for five years but only recently figured out how to align the aforementioned threads to make longer fibers. Now they’re starting to look into applications for the technology — including lab-grown meat.

They haven’t actually tried growing any sort of meat on these electrospun scaffolds. Yet. Ziegler said the next step is to get more funding so they can try and efficiently scale scaffolding production to lower the cost of the technology. Eventually Ziegler plans that scaffolds will be made with some material other than LEGOs (sorry). They then want to execute some tests to see if the scaffolds are indeed as useful for cultured meat as Ziegler predicts they will be.

Photo: Worcester Polytechnic Institute.

Ziegler’s method might be eye-catching, but he’s far from the only one trying to develop scaffolds for cell-based meat. In fact, scientists are experimenting with all manner of materials to try and make an edible ground for cellular agriculture.

One popular material is plants. By emptying plants of all their living material and leaving a sort of husk of cell walls, scientists can use their structure as a natural (and edible) blueprint for animal tissue. Worcester Polytechnic Institute is experimenting with spinach leaves as a scaffold for tissue growth (see above), and others are trying jackfruit and artichokes.

Fungi are also a natural fit. Startup Ecovative has developed a foam-like substance made out of mycelium, or delicate mushroom roots. Ecovative’s mushroom scaffolds can be grown in only 9 days and are tender enough to eat. They won’t dissolve, however, which could affect the overall flavor and texture of the end product.

Still, scaffolding isn’t the only way to create texture with cultured meat. Some companies are looking into 3D printing as a method to form “steaks” and more with animal tissue cells.

Of course, this technology is kind of moot until cell-based meat companies figure out how to clear those pesky regulatory hurdles and finally get the stuff to market. But as cultured meat becomes more widely available, and more affordable, consumer acceptance is going to play a larger and larger role. And it’ll be a lot easier to get the hardcore carnivores on board if they can try a cell-based steak that actually tastes — and chews — like the real thing.

January 28, 2019

Barilla-Backed BluRhapsody To Launch 3D Pasta Printing E-Commerce Service in 2019

Have you ever wanted to create your own customized pasta inspired by a favorite work of art, company logo or the likeness of a standup comedian?

You may soon get your chance.

That’s because BluRhapsody, the pasta printing spinout of Barilla’s Blu1877 group, will launch an e-commerce platform in the coming months where anyone can order customized pasta printed by a Barilla-developed 3D pasta printer.

The new e-commerce offering is an expansion of an early limited direct-sales business in which BluRhapsody worked with a small handful of Michelin-star chefs to create customized pasta for their restaurants. With the new e-commerce offering, anyone will be able to go to BluRhapsody.com and order pre-designed custom pasta and, eventually, design their own and order it online.

According to BluRhapsody CTO Antonio Gagliardi, the company’s custom-created pasta capability will evolve through a couple phases. At first, customers will be able to go to BluRhapsody and order from a small catalogue of pre-designed pasta.  There will also be the ability for customers to start custom projects in which they work jointly with BluRhapsody to create unique pasta designs. Finally, the company plans to eventually offer a “customize-your-pasta page” where the customers use an interactive online tool to personalize the shape, ingredients, and even taste and texture of the pasta.

The transition from a one-off service that only worked directly with 5-10 chefs to one in which BluRhapsody becomes what is essentially a ‘Sculpteo for pasta’ was made possible because the company has made significant progress over the last couple years in developing their 3D pasta printing technology. According to Gagliardi, the company has moved beyond the initial prototype the company co-developed with the Netherlands Organisation for Applied Scientific Research (TNO) to one based entirely on an internally developed design. With their new patent-pending pasta printer, BluRhapsody has optimized the design to print pasta with much greater efficiency.

Looking forward, I’m excited for an era of customized printed pasta. I can see a world where not only do restaurants big and small design their own unique designs, but average folks like myself create pasta for special occasions or gifts.

And who knows, maybe if Seinfield was a modern day sitcom, Fusilli Jerry would be printed rather than hacked together in Kozmo Kramer’s apartment.

October 21, 2018

Edible Carving: The World’s First 3D Printing Restaurant

3D printing has become the 21st century’s new manufacturing tool and is regularly applied in industries such as aerospace, automotive, fashion and healthcare, but in the last few years it has also made its way into professional kitchens. FOODINK is one key example of a company pioneering the use of food 3D printing and its founder, Antony Dobrzensky, believes the technology is an unstoppable force for the food industry.

FOODINK’s best known project and biggest milestone so far is “the world’s first 3D printing restaurant,” where everything is 3D printed on site, including the tables and chairs, the utensils and the food – all nine courses of it! The premiere took place in in Shoreditch, London, lasted three days and hosted 12 guests per day. The restaurant was later showcased in Barcelona and is now set for more worldwide destinations.

The idea was conceived and executed by Dobrzensky, (entrepreneur, technologist, investor) and his multi-talented international team, including chefs Mateu Blanch of Spanish molecular gastronomy restaurant La Boscana, and Joel Castanye an elBulli alumni with Arthur Mamou-Mani as the design advisor. Aside from this core team, Dobrzensky also brings in an outer circle of architects, artists, chefs, designers, engineers, futurists, industrials, inventors and technologists for advice and guidance.

The 3D printers themselves are made by ByFlow, a company based in Maastricht in The Netherlands. ByFlow has specialized in 3D printing since 2009 and in 2015 they developed a 3D food printer called ‘Focus’ which quickly entered the food industry. It’s no wonder FOODINK has partnered with the Dutch company as it says on their official website they believe “we can change the way people make and experience food.” For Dobrzensky too, 3D food printing isn’t just a throwaway trend and he says his team has devoted their knowledge, expertise and creativity to ensure that this revolutionary vision becomes a present experience.

The idea of 3D printed food may seem far fetched or perhaps something for the distant future, but when you consider the drastic changes already happening in the food industry now you can see why restaurants are interested. For example, flavour matters, but in a world dominated by images, what food looks like is becoming more and more important. According to a recent study by Maru/Matchbox 69 percent of millennials take photos of their food before eating it and many of those will be uploaded to social media. It’s no surprise then that Instagram has the power to influence the food we eat and the environment we eat it in. The prosperity for a certain image to go viral is driving restaurants to serve up eye catching dishes and fancy decorative drinks. FOODINK has shown that a 3D food printer can really help a restaurant stand out from competitors by creating new food designs which are impossible to do by hand or with traditional techniques.

Often food can compromise on flavour when the goal is to make it photogenic but for Dobrzsensky he believes they have found a way to not only retain a delicious taste but to keep it nutritious. When asked in a munchies interview, Dobrzsensky stated that “This food is made from all-natural ingredients and is more healthy and nutritious than food in other restaurants.” Chef Castanye adds that “We use the same ingredients but just served in a different way.” It seems that one of the most important factors to FOODINK’s approach is that they don’t disregard the chef and he/she still plays a pivotal role in the process. The fresh ingredients need to be chosen, cooked, blended and put in to tubes and there needs to be the right consistency in order to print successfully.

Food 3D printing is an exciting move for the world of food and technology and there’s a lot of potential. The stage for this change wasn’t set overnight. Years of innovation has led to the precipice of the food 3D printing revolution, and it seems that it is just a matter of time before we see advancements in speed and material capabilities that together will push the  technology in to a more user friendly domain. At some point, it might be as common to find a food 3D printer in a restaurant as it is to find a thermomix. We can only wait and see!

 

October 14, 2018

Edible Carving: Eating an Ecosystem

Edible Growth is a bite-sized  “mini vegetable garden with crispy plants and mushrooms”. It is also a 3D food printed project created by Eindhoven-based food designer Chloé Rutzerveld whose passion lies in rethinking the ways food is produced and consumed. The concept behind Edible Growth involves a specially printed outer casing made from dough that contains “edible soil” and various organisms (yeast, seeds and spores). Five days after printing, the plants and mushrooms germinate while the yeast ferments the solid inside into a liquid, after which they start to grow and poke through the holes of the casing – at which point it is ready to eat.

Most 3D food printers print using raw materials, which must be processed into a puree, powder or paste so that the printer can successfully extrude the food substance. However, in the case of fruit and vegetables, the process causes a significant decrease in nutritional value and loss of texture. Consequently, it is difficult to print healthy food and most 3D printed food is made from dough, sugar or chocolate. On her website Rutzerveld states that with the rise of more high-tech food and new production methods, consumers are becoming increasingly more concerned about their health as well as the quality and ‘realness’ of their food. This is why Rutzerveld has made it her mission to find a way of 3D food printing healthy, functional food.

Rutzerveld is not just proposing a way of using the 3D food printer as an extruder but wants to refigure the printer as not only a tool to enable natural growth but also to enhance it. Her design is a visualisation of how an edible ecosystem could look and opens up the possibility of a new food category – nutrient rich food that is eaten while still “in growth”. The design is currently a concept as current food printing techniques are not advanced enough and would involve several years of research and development. Nonetheless, there are many people interested in it’s potential. Rutzerveld’s main aim is to stimulate and provoke scientists, food technologists and designers to think differently when creating future food products.

Rutzerveld’s concept is not only a way to make a unique and new type of health food but she also sees how it can have environmental benefits. She foresees the possibility of home growth foods drastically reducing the need and strain on agricultural land. At the same time she believes post harvest and harvest labour would become unnecessary  and that farmers would be the providers of raw materials, not the fruits and vegetables themselves. As a result the consumer would become the farmer and will be more involved in the production of their food, without spending a lot of time gardening.

Edible Growth began in 2014 and has already been showcased in many countries around the world including the US, Asia, Canada and many countries in Europe. It has also been featured in several websites and magazines such as Frame, Mold and Vice. Four years on and the interest in Rutzerveld’s concept is by no means declining. Edible Growth is currently being displayed in Brazil’s Museum of Tomorrow and it is also featured in Rutzerveld’s book which is being launched this month (October 12th) – with world wide availability from early 2019.

October 7, 2018

Edible Carving: How Nūfood is Bursting on the Food Scene

Nūfood is a 3D food printer making “flavour bursts” to accompany food and drinks. This printer was created by Dovetailed, a startup founded by Vaiva Kalnikaitė with Gabriel Villar as the chief developer. Based in Cambridge, England, at the university’s Idea Space, the company describes itself as an unconventional user experience design studio and innovation lab delivering design thinking and beautifully crafted experiences to innovative companies and global brands. Dovetailed creates technologies for CAD design, self-quantification, everyday memory, internet of things, public visualisations, wearables, behavioural change, experimental dining and of course – food 3D printing.

Nūfood is different from all other food 3D printers in that it prints using liquids. The key difference is that unlike all other food 3D printers nūfood  uses the raw ingredient in liquid form (i.e fruit juice) and not a composite material. The printer is able to make three dimensional structures by using the drops as a building material. It does this by encapsulating each drop within a very thin membrane which allows the drops to stick together. The membrane also gives these foods a unique popping sensation when eaten!

There’s scope to play with shapes and colours. Take a raspberry for example, with the  nūfood printer you can print something that has the exact delicious flavour of a raspberry but design it in a way that is far from its natural form, by making it blue and in the shape of a cube. Dovetailed have said themselves that they like to play with traditional concepts like “strawberries and cream” and have printed the two flavours together in a bite-sized piece.

Making these “flavour burst” foods is easy as the nūfood printer works together with a user friendly phone app. This app allows you to print up to two flavours at once and gives you the chance to design your own pattern or the option to choose from their library – within minutes your food garnish is ready!

The team’s aim is not only to bring the nūfood in to our homes but also to introduce the idea to appliance manufacturers and for them to use their technology and apply it on an industrial scale. In addition, they also see big potential for food and beverage manufacturers looking for new technologies for product development. That can be for making new products from scratch or adding value to their existing line. We can’t wait to see what’s next!

 

September 30, 2018

Edible Carving: How 3D printers Could Create Your Next Meal

Since its invention in the 1980s, 3D printing technology has evolved at lightning speed. A decade ago, the original technology — where physical objects are printed from 3D digital models — was only reserved for corporations and universities designing prototypes and architectural models. Today, smaller and more affordable, they can be easily seen in kitchens and storefronts, grade schools and homes.

3D food printing has found itself at the forefront of digitally printed objects. Currently, confectioneries around the world are using 3D printers to produce vibrant layers of candy. The culinary world is also using the technology to produce masterful desserts. Some entrepreneurs have gone further and opened restaurants that use 3D food printers to serve gourmet cuisines, such as Food Ink. Recent advancements in the 3D printing industry have also made it possible for these machines not only to print, but to also cook and then serve foods.

Food 3D printing represents a unique opportunity to go beyond aesthetic and tackle transformational change across economies, industries, global issues. Printers could create nutrient-rich and environmentally-friendly food products and even help address hunger problems in areas that need access to quality and affordable ingredients. The technology also creates an opportunity for food customization.

The Basic Principles

Current 3D food printers are designed to deposit small layers of material through a process called additive manufacturing — think of a frosting dispenser except the ingredients are squeezed out, layer by layer, by a robotic arm.

The latest models of 3D food printers are more complex and detailed. Examples of such devices are those used in the candy and baking industries. The 3D printer ChefJet crystallizes small layers of sugar into several geometric configurations, while Choc-Edge dispenses chocolate from syringes into intricate, delectable designs. Some advanced printers, such as The Foodini, use fresh ingredients filled in stainless steel containers to make different types of foods like stuffed pasta, pizza, brownies, and quiche.

Suffice it to say, 3D food printing technology is still developing and may hit new strides that will change food and the way people eat. But what does the future hold for 3D food printing? Will 3D food printers impact the food industry?

The Future: Customization and Health Impact

3D food printing is braced to have a big impact on the food industry. According to a 2018 Research Nester report, the 3D food printing market is expected to to expand at a compound annual growth rate of 50 percent during the period 2017-2024, and is expected to reach $400 million by 2024. The research suggests that the market growth is driven by two main factors: an increased desire for customization and applications from the healthcare sector.

Food industry places are making rapid advances with 3D food printing to ensure individuals and manufacturers can customize food products with regards to nutritional value, flavor, and ingredients. For example, consumers can tailor 3D printed food to their health requirement and taste. With this technology, it is possible to customize food for pregnant women, athletes, children, the elderly — people who commonly have very specific requirements in terms of nutrients. These devices can help people combine the right quantity of carbohydrates, fatty acids, minerals, vitamins, and other nutrients, helping consumers tailor food specifically to their individual dietary needs.

3D food printers can also allow for better control over portion sizes, cutting down on overconsumption and food waste. Moreover, they will have the capacity to turn raw ingredients into a healthy puree, making it easier for people with certain medical conditions who find eating whole foods challenging. German nursing homes are already using 3D food printers to make a pureed food product called “smoothfoods,” a mixture of fresh ingredients made into healthy, delicious molds that resemble their favorite dishes. This process allows the residents to enjoy food without fear of choking, discomfort or pain. There is also WASP, a 3D printing company in Italy, which is producing gluten-free products of popular foods, such as pastries in the shape of gnomes.

The Challenges

Despite the many exciting possibilities of 3D food printing technology, the industry still has challenges to overcome. To print food using the current 3D printer, users must convert their ingredients into a paste. It is the only way the device can manipulate the ingredients. Furthermore, most printers available today are designed for dry and shelf-stable materials, excluding most dairy and protein products that spoil faster. That means every ingredient must be dry otherwise users will have to worry that something could spoil. It is a matter of food safety. And while there is hype about 3D printed food and the technology in general, it is important to measure expectations. In simple terms, we must continue to consider the health, environmental and social impacts of food printing.

The 3D printing examples may seem anecdotal or out of reach, but expect to see more mainstream application of this technology in the future. 3D food printing is more than a fleeting curiosity, it’s a powerful tool that can forever change the way we make, choose and eat food.

As this article on the IQS Directory points out, 3D printing is hot and it’s only going to get hotter. Follow this series in the forthcoming weeks to learn more about some singular food makers who are shaping the food 3d printing space!

August 25, 2018

Food Tech News: Bye Bye Plastic Bags, Hello Beer Hotels

This week was a bit of a whirlwind for food and kitchen news. And no, we’re not just talking about Snoop Dogg’s cookbook announcement.

For all the stories we write about on the Spoon, there are a few we don’t cover but still think are worthy of a shoutout. Hence: food tech news roundup. Check out the list of stories that caught our eye this week, from craft beer hotels to President Trump-bound letters about cultured meat:

Kroger is phasing out plastic shopping bags
Grocery giant Kroger is gradually reducing their use of plastic bags. This week they started phasing them out in their Seattle QFC stores, and they plan to eliminate them altogether by the end of 2019. Kroger claims they’ll be completely plastic bag-free in its roughly 2,800 stores by 2025. This is in line with other initiatives to reduce single-use plastics; Seattle has already banned plastic straws and Starbucks is eliminating straws in all of their locations. Plastic bags seem like the next step in the march to prevent more plastic waste getting in our oceans.

 

Opposing sides work together to regulate cultured meat
Lab-grown meat company Memphis Meats and the North American Meat Institute (NAMI) teamed up to pen a letter to President Donald Trump asking his administration to “clarify the regulatory framework for cell-based meat and poultry products.” They asked that the U.S. Department of Agriculture (USDA) and U.S. Food and Drug Administration (FDA) collaborate to oversee regulation of the new product.

This letter comes almost a month after a band of agricultural groups wrote their own letter to the President, asking for similar regulation to be applied both to traditional meat and “cell-based meat and poultry. It’s also close on the heels of the FDA’s public meeting on cultured meat, in which they examined safety and labeling issues around this emerging food. The fact that these two groups reached across the aisle to ask for the same thing — fair, consistent regulation — is a reality check for those groups who thought that cultured meat was a thing of the distant future.

 

Zippin unveils checkout-free tech to compete with Amazon Go (and others)
This week startup Zippin launched their software platform which lets retail shoppers fill their bag and walk out, without stopping to check out. Their shop, which uses a combination of cameras and smart sensing shelves to track shoppers’ selections, will open in San Francisco sometime next month. The company is trying to compete with Amazon Go, who pioneered their cashierless tech at their Seattle store, as well as rival technology Trigo Vision. Microsoft and All_ebt are purportedly working on cashierless shopping systems of their own.

 

Brewdog opens craft beer hotel in Ohio
Craft beer obsessives, we’ve got your next vacation lined up for you. This coming Monday Scottish craft beer company Brewdog will open what their website calls “the world’s first crowdfunded beer hotel” in Columbus, Ohio, right next door to their U.S. brewery. According to Food & Wine, The Doghouse has beer taps in all of the rooms, beer-stocked minifridges in the showers, and even uses beer-infused products in their spa. Guests can also play beer pong in the lobby and hop (pun intended) over to the brewery for an interactive tour. As the company’s name implies, dogs are welcome.

 

U.S. Army Lab turns plastic water bottles into 3D printed goods
The U.S. Army Research Lab (ARL) are repurposing plastic from sources like yogurt containers and water bottles as 3D printing materials. 3D Printing Industry reported that the ARL is hoping that this tech can be used within Army bases, so service members can quickly create parts for equipment and weapons. This shortens the supply chain, makes use of recyclable materials, and ensures that military members can create necessary plastic parts without having to wait for their next supply truck.

Did we miss any news? Tweet us @TheSpoonTech!

August 22, 2018

Ripple PM Prints a Selfie on your Cocktails

We are all used to the idea of Instagramming our cocktails, but the new Ripple Maker PM, made by Ripples, lets you place your Instagram-worthy photos directly on the foam of your favorite boozy beverage.

To customize a cocktail, users upload selfies, logos, or other images to the WiFi-enabled appliance using a Facebook Messenger app. From there, it takes the Ripple PM about ten seconds to “print” a greyscale version of the image using a malt extract directly on top of a beer head or frothy drink like a Pisco Sour.

Shipping now, the Ripple PM is actually a re-jiggered version of an earlier device, now known as the Ripple AM, which uses coffee extract to print customized images on coffee foam. (Get it? AM for the morning drinks, PM for the evening.) Changes to the PM include a better seat for cocktail glasses and a different drainage system. In addition to the AM and PM, Ripples also makes a Beer Ripple for all the lagerheads out there.

“The product is a platform that allows hospitality and food and beverage to use froth of their beverage as a new canvas of communications for their customers,” Ripples CEO Yossi Meshulam told me during an interview.

The Ripple PM itself costs $3,000. Print packages for the malt extract are $1,500 a year, which includes software and the first 6,000 prints (coffee print packages are $1,200/year). In addition to uploading photos directly to the machine, Ripples has a creative studio that regularly updates an online image catalog of downloadable content for printing.

Meshulam said that depending on what is being printed, a malt extract cartridge should last three to four days of heavy use before needing to be replaced. Similar to modern inkjet printers, the Ripple PM knows when it’s running out of extract and will proactively re-order cartridges for you.

While it’s not aimed at the consumer market, this is another good example of the many ways technology is enabling more customization and personalization of what we consume. It may not be as fancy as having your face 3D printed in chocolate, but it’s a little less gruesome to sip your selfie than bite your own head off.

May 6, 2018

Pablos Holman Sees a Future Where We Print French Bread & Strawberries

While 3D food printing is still in its early stages, inventor/hacker Pablos Holman believes we’ll eventually live in a world where printers in our homes spit out complicated foods like French bread and even something resembling strawberries.

“This isn’t as weird as it sounds,” said Holman, who spends his days working in the lab at Intellectual Ventures, Nathan Myhrvold’s invention and research organization that has become one of the most prolific invention centers – as measured by patents filed and issued – in the world.

According to Holman, wheat and other materials within bread could be stored in “printer” cartridges and turned into bread at the push of a button.

“What a chef is doing is putting wheat through a complicated process to manage texture,” said Holman. “What my 3D printer would do is put down a pixel of wheat, hydrate with a needle, zap it with a laser to cook it, rinse and repeat for every pixel, and it’s going to print you a meal.”

While it’s weird to think of foods traditionally cooked by humans instead being printed on printers, Holman thinks this method is vastly superior to the one-sized-fits-all production method of traditional kitchens.

“The (3D printed) meal is customized and customized for you,” said Holman, who before working at Intellectual Ventures helped to start Jeff Bezos’ space travel company, Blue Origin. “It avoids your allergens, and dietary restrictions and injects your pharmaceuticals.”

In short, Holman believes 3D printed meals could be optimized for each person’s specific dietary requirements and taste profile. “Now we have a way of correlating your diet to health effects. If you have to get off of sodium, we’ll drop it by one milligram a day for months, and you’ll never feel it happen.”

“Unless you have a personal chef, it’s almost impossible for people to do that kind of thing right now,” Holman continued. “What we really want to do is have the computer to know what you ate, know what health effects you are experiencing are, know how to tune your meals so that they’re optimized for you.”

In Holman’s view, the biggest challenge to ushering in a world of personalized printed food will be managing texture. But, he believes, it’s a challenge that is hardly insurmountable: “When you think about what a chef is doing, they’re managing flavor, managing aroma, managing nutrition and they’re managing texture,” said Holman. “I can buy flavor in a bottle. I can buy aroma in a bottle. I can both nutrition in a bottle. What’s left is managing texture.”

And, as Holman sees it, developing 3D food printers that can create food textures that are pleasing to the human tongue is just another step forward on centuries-long creativity continuum that brought us food like French bread and pasta. “We learn new textures are the time,” he said. “God did not invent pasta or French bread. Those are inventions. Humans make those.”

Holman is not shy about sharing this view. Five years ago he went to Parma, Italy, the birthplace of pasta, to speak at Barilla headquarters where he “told a room of full of twelve hundred Italians that God did not invent pasta.”

While Holman hasn’t been invited back, Barilla may have gotten the message anyway: The world’s largest pasta company has since launched its own 3D pasta printer.

If you want to listen to the full conversation with Pablos Holman to hear his views on the evolution of 3D food printing, the development of Intellectual Ventures lab and more, you can download the podcast here, get it on Apple podcasts or just click play below.

April 20, 2018

Feast Your Eyes on These Weird & Wonderful Instagram Feeds

Ah, Instagram. You keep us entertained in airports, waiting for the bus, and standing in line at the post office. You keep us up to date on our acquaintance’s lives and celebrity’s lives. Sometimes you even inspire us.

If you want to add some delicious, weird, and informative food-focused Instagrams into your feed, we’ve got seven to scroll through.

@smallhold.co: Mushroom lovers, this one’s for you. Smallhold is a subscription-based fungi minifarm, and NYC’s only mushroom farm.

Screen Shot 2018-04-16 at 9.26.40 PM
Screen Shot 2018-04-16 at 9.26.14 PM
Screen Shot 2018-04-16 at 9.25.46 PM
Screen Shot 2018-04-16 at 9.25.05 PM

 

@dinarakasko: Pastry chef Dinara Kasko makes crazy beautiful edible geometric sculptures using 3D-printed molds, which she sells on her website.

Screen Shot 2018-04-16 at 4.20.01 PM
Screen Shot 2018-04-16 at 4.17.23 PM
Screen Shot 2018-04-16 at 4.18.42 PM
Screen Shot 2018-04-16 at 4.18.17 PM

 

@impossiblefoods: A must-follow for anyone that loves adorable anthropomorphized burgers, bright colors, and Impossible’s plant-based “bleeding” burgers.

Screen Shot 2018-04-16 at 4.58.48 PM
Screen Shot 2018-04-16 at 4.59.22 PM
Screen Shot 2018-04-16 at 4.59.31 PM
Screen Shot 2018-04-16 at 4.59.39 PM

 

@kitchensuspension: This Italian account features kitchen ingredients and tools in… suspension. It’s wild and disorienting and a fun “how’d they do that,” though the photos sometimes feature creepy dyed hands.

Screen Shot 2018-04-16 at 4.29.26 PM
Screen Shot 2018-04-16 at 4.29.11 PM
Screen Shot 2018-04-16 at 4.28.57 PM
Screen Shot 2018-04-16 at 4.28.25 PM

 

@modcuisine: Wacky, mind-bending, and guaranteed to make you hungry, Modernist Cuisine’s Instagram has some seriously high-class photography.

Screen Shot 2018-04-16 at 9.30.20 PM
Screen Shot 2018-04-16 at 9.30.00 PM
Screen Shot 2018-04-16 at 9.29.10 PM
Screen Shot 2018-04-16 at 9.28.49 PM

 

@uglyfruitandveg: Celebrating oddly-shaped produce in all its glory. This Instagram’s goal is to reduce food waste by showing off misshapen produce that would normally be tossed, but it can also be just plain funny.

Screen Shot 2018-04-16 at 9.37.29 PM
Screen Shot 2018-04-16 at 9.35.47 PM
Screen Shot 2018-04-16 at 9.35.33 PM
Screen Shot 2018-04-16 at 9.37.48 PM

 

@paulfuentes_design: This Instagram of Mexican artist Paul Fuentes is whimsical and inventive. It makes you look at food not just as an object to be eaten, but one to be played with.

Screen Shot 2018-04-16 at 9.06.23 PM
Screen Shot 2018-04-16 at 9.06.08 PM
Screen Shot 2018-04-16 at 9.05.48 PM
Screen Shot 2018-04-16 at 9.05.35 PM

What’s your favorite food-related Instagram account? Did we miss any? Tell us in the comments or on social media at @thespoontech!

 

April 4, 2018

Teleported Sushi Has Big Implications for Digital Food

When I first heard internet murmurings that a company had figured out a way to teleport sushi, I immediately thought of one of my favorite childhood films: Willy Wonka and the Chocolate Factory. (The old version, not the new one with creepy Johnny Depp.)

Near the end of the movie, Wonka gives his diminishing troupe of children a tour of the factory’s teleporting technology, which has the power to “beam” you a chocolate bar through your T.V. As a chocolate lover and a T.V. lover, I was smitten. But I assumed that this technology would probably never become a reality, at least outside of Wonka.

How happy I am to be wrong!

A Japanese company called Open Meals premiered their “sushi teleportation” technology at SXSW2018, conducting what they call “the world’s first food data transmission.” In the demonstration, sushi that was designed in Tokyo was printed, via Open Meals’ Pixel Food Printer, in Austin, TX.

Their sushi currently prints in 5-millimeter blocks, giving the results a pixellated look straight out of an 80’s video game. However, they hope to reduce the size to 1-millimeter blocks, which would give the food a more organic, realistic appearance.

This demonstration was just the beginning of Open Meals’ plan to transform the way that food is created and transported. Eventually, Open Meals hopes to be able to transmit ingredients and whole dishes, using data and something that their website calls “Social Food Network Services.” They want to usher in what they dub the “fifth food revolution,” whose hallmarks are the “digitalization, transmission, and re-generation of food.”

Open Meals’ Pixel Food Printer isn’t the only 3D food printer out there; there’s also the Foodini and Dovetailed, and scientists at Carnegie Mellon recently came up with a way to DIY a 3D bioprinter. But its approach is unique. Instead of using food paste in a canister, sugar, or liquid as its medium, their machine (patent pending) uses data to set exact specifications to mimic the nutrients, color, texture, and flavor of a specific food, which it then adds to a gel pixel. The robotic arm “prints” this customized gel into a miniature 3D cube, which it stacks to reproduce the appearance of the food its replicating.

Open Meals’ Pixel Food Printer

The sushi demonstration was certainly flashy, but in my opinion the real potential for Open Meals’ vision lies in its Food Base project.

Their digital food platform allows users to search, upload, download, and share data, such as taste, texture, nutrient composition, and color/shape, for specific ingredients or dishes. They can then send that specific food’s data profile up to their connected Pixel Food Printer, which will recreate it.

Open Meals hopes to source data from Michelin-star restaurants, home cooks, television shows, and even food-themed art to populate its database.

Obviously we have a long way to go before we reach a time when digitized, teleported food is feasible on a large scale. You would never mistake Open Meals’ “transported” sushi for the real thing, and apparently the taste was nowhere near bluefin tuna or prawn.

But the implications of what they’re doing is huge, way beyond just a cool-looking trick for SXSW. OpenMeals wants to digitize food like Apple and others digitized music, democratizing it — at least for those who can afford its Pixel Food Printer. (The machine is currently a prototype, but if mass marketed will no doubt fetch a pretty penny.)

Open Meals’ digital food database.

Extrapolating from the claims on Open Meals’ website, a future with digitized, printable food could:

  • Allow for carefully calibrated meals for people with illnesses like diabetes, or athletes with restrictive diets. This could become especially popular as demand for personalized diets is on the rise.
  • Provide on-demand, nutritious food to disaster areas or combat zones where farming infrastructure is weak. That is, assuming the printed food and its corresponding 3D bioprinters would ever be affordable enough for disaster relief organizations to purchase in bulk.
  • Preserve traditional dishes, from cultural hallmarks to mom’s beef stroganoff recipe. Because we all know how hard it is to make food exactly like mom does.
  • Replicate elaborate dishes from cooking shows, so you can eat along with the T.V. (Way better than Smell-O-Vision.)
  • Help lab-grown meat mimic the texture of bluefin tuna or ribeye steak.
  • Be beamed into space so that astronauts can enjoy a wide variety of meals without having to pack a lot of heavy food. This is especially intriguing as NASA gears up for the 2030 mission to Mars. 

Open Meals hasn’t given a timeline for their goals to digitize the future of food. Until they do, I’ll just have to keep dreaming of the taste of a teleported chocolate bar.

March 31, 2018

Food Tech News Roundup: DIY Food Printers, Salad Analytics, Ramen Robots

It’s time for your weekly dose of food tech news! This is when we take a look at some of the stories from the week which intrigued us and put them all in one convenient place.

This week we’ve got stories about lab-grown meat, DIY 3D bioprinter building, and sushi-serving robots. Get yourself a big mug of coffee and settle in for a read.

Lab-grown meat company Wild Type gets a funding boost

Cultured meat company Wild Type raised $3.5 million this week in a seed round led by firm Spark Capital with participation by Root Ventures, Mission Bay Capital, and other investors.

Wild Type is yet another player in the growing field of clean meat, along with startups like Memphis Meats, Mosa Meats, and Supermeat. Startup Finless Foods is also using cellular agriculture to culture fish in a lab, though they’re focused on bluefin tuna while Wild Type is working on salmon.

Wild Type hopes to use its new capital to speed up the development of its cultured salmon, increasing manufacturing capabilities while lowering costs. Their first product will be minced salmon meat intended for use in sushi, but they hope to eventually develop an animal-free lox and salmon filets.

 

 

Image: Adam Feinberg, HardwareX

Carnegie Mellon bioprinter could democratize 3D printing

Researchers from Carnegie Mellon University (CMU) recently developed a low-cost 3D bioprinter and are publishing the designs as open source so that anyone can build their own.

The researchers were able to cut costs by applying a syringe-based large volume extruder onto a standard desktop 3D printer (you have one at home, right?), essentially DIY-ing a 3D bioprinter. Bioprinters typically start at $10K to $20K and can cost up to $200K, but this MacGuyvered one can be built for under $500. It’s also easier to modify than a traditional 3D bioprinter.

Though the CMU team’s original research centers around organ tissue printing for transplants, their instructional abstract notes that these homemade bioprinters can perform “a wide range of 3D printing applications, including bioprinting, embedded printing, and food printing.” As we’ve covered on The Spoon before, 3D food printing is a massively underexplored area of food tech. Maybe these (relatively) affordable bioprinters will change that and make 3D food printing more accessible.

 

Image: Yoshikazu Tsuno, AFP via Mashable

Ramen-serving robots invade Seattle

Plenty USA will launch the new version of their AI-powered, Japan-made robot, dubbed ‘SOTA,’ in Seattle next month. The robot will premiere at JUNKICHI, a robota izakaya restaurant scheduled to open on April 15th in the Capitol Hill neighborhood.

SOTA sits atop restaurant tables and uses AI to recognize diners’ faces. It is meant to facilitate communication between customers and servers, though it seems like having a table-bound robot as the middleman would make communication more confusing, if anything. Users can also use the SOTA app to make the robot speak, having guided conversations while they snack on hot pots and grilled meats.

This will be the North American launch for SOTA, but the robot is already a regular fixture at an izakaya restaurant in Japan. (They’e begun their integration into restaurants in America, as well.) According to Market Insider, the restaurant reported a 10% jump in sales since it started using SOTA, and the robot is a popular attraction for dinners. We’ll have to wait and see if it has the same success in an American market.

P.S. Keep an eye out for The Spoon team to make a field trip and interact with these robots ourselves! And eat some sushi, of course.

 

Beer gets high

For those who hate to choose between their vices, there’s a new product for you. Keith Villa, the inventor of Blue Moon beer has partnered with Ebbu, a company that works with marijuana compounds, to launch a THC-infused, non-alcoholic beer in Colorado this fall. The brew is designed to have the marijuana hit the drinker at the same rate as if they were consuming a beer.

The team plans to develop a wheat beer, a light beer, and a stout. The product will launch in Colorado, but producers want to eventually sell it in all states where marijuana is legal.

Other brewers, such as Lagunitas, have infused beer with CBD, a cannabanoid which does not produce any hallucinatory effects. However, this Colorado-based brew will be the first to incorporate THC, which is what gives marijuana users the trademark “high.” Its success (or lack thereof) will speak to how flexible Americans are willing to get with their cannabis consumption.

 

SweetGreen harnesses analytics to inform its new menu

Earlier this week, fast-casual salad chain SweetGreen made a major menu chance. At first glance, it seemed that all they had done was tweak their offerings — but it’s the why, not the what, that’s so interesting.

SweetGreen’s menu changes were apparently a direct result of tech-driven insights. The company recently told Bloomberg that they now use blockchain to track their produce, and also to inform their app (which they launched in 2013). Through the app they collect customer analytics to determine which salads to keep, which to introduce, and which to take off their menu, all of which led to their new menu — the first major menu change in 10 years.

This change is an indicator of how fast casual joints, like Eatsa, are integrating tech into their service models to distinguish themselves from the competition. They’re also harnessing platforms like Toast and Ingest.ai to help run restaurant operations for efficiently and increase revenue. Which all goes to say that this restaurant market is one that will likely see a lot of growth and change — in salad toppings and beyond.

 

Previous
Next

Primary Sidebar

Footer

  • About
  • Sponsor the Spoon
  • The Spoon Events
  • Spoon Plus

© 2016–2025 The Spoon. All rights reserved.

  • Facebook
  • Instagram
  • LinkedIn
  • RSS
  • Twitter
  • YouTube
 

Loading Comments...