Close Ad

The Spoon

Daily news and analysis about the food tech revolution

plant-based alternatives

Sausage Made from Jackfruit? It’s Delicious

Hailing from Asia, jackfruit is the largest tree fruit globally and is often likened to the flavor of Juicy Fruit gum. This massive spiky fruit seems like an unlikely fit as an ingredient in the plant-based space, but unripe jackfruit has a neutral flavor and a texture similar to shredded pork or chicken.

One company that makes plant-based meat alternatives using jackfruit is Boulder, Colorado-based Jack & Annie’s. Jackfruit serves as the main ingredient for its extensive portfolio of plant-based alternatives, ranging from meatballs to shredded pork.

Jack & Annie recently sent me samples of its plant-based maple breakfast sausages, savory breakfast sausages, and chicken nuggets to taste test.

I first tried the maple breakfast sausage and savory breakfast sausage, both of which are made from a base of jackfruit, water, soy flour, and canola oil. Using my cast iron pan, I cooked both types of sausages in a small amount of oil for about 8 minutes.

Photo of the jackfruit-based chicken nugget (left), savory sausage breakfast patty (right), and maple breakfast sausage link (top)

So how’d they taste? Both alternative sausages were the right amount of oily, and had a great, chewy texture like a animal-based breakfast sausage. The level of seasoning in each sausage was phenomenal, and my entire (small) house smelled liked maple syrup after cooking.

The chicken nuggets, made from a base of jackfruit, water, wheat flour, and soy flour, were next. I cooked them in my air fryer for about 8 minutes and plated them.

The verdict? Like the sausages, the texture was spot on. However, I felt like the nuggets lacked seasoning (at least compared to the sausages) and the breading was a bit thin. There are a lot of plant-based chicken nuggets on the market now, so it’s challenging to say which is the best (I personally really like Nowaday’s nuggets).

Pea protein, soy, fungi, and wheat are some of the most commonly used ingredients used to create plant-based meat alternatives. These ingredients are lauded for their affordability, high protein content, and ability to mimic the texture of different animal proteins. Although jackfruit is affordable and has a great natural texture, one downside to it is that it’s protein content is not as high as other ingredients. However, it does offer potassium and vitamin B.

A few other companies in the plant-based space besides Jack & Annie’s are using jackfruit as a base ingredient. Last year, Singapore-based Karana raised $1.7 million to develop plant-based pork made from the fruit. Upton’s Naturals offers a few different flavors of seasoned, ready-to-cook shredded jackfruit, and The Very Good Butchers produce a taco stuffing.

Overall, I found Jack & Annie’s products to be great alternatives. The company’s products range from $4.99-$6.50, and can be found in stores like Sprouts. Target, Wegmans, and Meijer.

Revo Foods Raises €1.5M to Advance its 3D-Printed Alternative Salmon

Austria-based Revo Foods crafts 3D-printed salmon made from plant-based ingredients, and over the weekend the company announced that it has raised €1.5 million euros (~$1.78 million USD) in funding. This is the company’s first round of funding, and it included participation from Hazelpond Capital, Eva Summer (CPO of Peace of Meat), Friends2grow, Jens Schuman, MKO Holdings, and national support from the FFG Austrian Research Promotion Agency and Vienna Business Agency.

Revo Foods’ funding will be used to accelerate its 3D food printing process, as well as expand its team. The company has several plant-based salmon products that its plans on launching in Europe this year. Its smoked salmon strips and smoked salmon spread is made from pea protein, citrus fiber, and algae oil (these products are not made through 3D printing). The plant-based salmon sashimi is still being developed, and is created using a 3D printing process to create complex structures similar to real salmon.

The company held the first live tasting of its plant-based salmon products at the beginning of March. The tasting was held in Vienna, Austria and Revo Foods partnered with Budapest Bagels to serve its smoked salmon strips in the bagels. Only a handful of journalists were able to attend in person, and one food vegan food writer said, “It tastes too similar like fish, I can hardly eat it.”

There are a few other notable players in the plant-based fish space, however, these companies do not use 3D printing like Revo Foods. In the U.S., Gathered Foods (the parent company of Good Catch) raised $26.35 million in a B-2 bridge funding round at the beginning of April. Hooked is a Swedish-based company that produces plant-based tuna and shredded salmon alternatives. New Wave Foods announced the last week of March that its’ plant-based seafood alternative is now available for foodservice companies and restaurants.

Revo Foods plans on launching its smoked salmon strips first in Europe within 2021. In the next two to three months, the company expects to finalize the development of its plant-based salmon sashimi.

Eat the Change Launches Jerky Made From Upcycled Mushrooms

Mushrooms naturally have a meaty texture and savory flavor, which makes them perfect as an ingredient for plant-based meat alternatives, so it’s no surprise that companies in the alt-protein space are using them to create everything from bacon to steak. One company, Eat the Change, recently joined the list of players with the launch its plant-based jerky made from mushrooms.

Eat the Change was founded by Seth Goldman, founder of Honest Tea and chair of the board at Beyond Meat, and Spike Mendelson, a celebrity chef and restauranteur. To celebrate the launch of the company’s mushroom jerky, I was invited to a virtual tasting, where I got to sample the five flavors of jerky: hickory smokehouse, habanero bbq, maple mustard, sea salt + cracked black pepper, and teriyaki ginger. (Maple mustard is my favorite!) Besides being eaten straight out of the bag, the jerky can also be used in sandwiches, noodle dishes, and other recipes.

Organic crimini and portobello mushrooms are the base of the jerky, and the company uses imperfect mushrooms cosmetically unfit for retail that would otherwise get thrown away. The mushrooms are marinated, and then instead of using liquid smoke flavoring, the company actually smokes the mushrooms over hickory branches. The jerky naturally has high amounts of several B vitamins, and one bag contains 4 grams of protein.

Although plant-based burgers get a lot of attention, there is room for expansion in the plant-based jerky space. Several other companies are also using mushrooms as the key ingredient for their plant-based jerky. Moku Foods uses king oyster mushrooms, while Pan’s Mushroom Jerky uses shiitake. Akua uses both seaweed and mushrooms to create its plant-based jerky.

Eat the Change mushroom jerky is currently available in 300 stores nationwide, including Whole Foods, Erewhon, MOM’s Organic Market, Fresh Market, and Stop & Shop. It is also available for purchase on the company’s website, and the retail price is around $5.99 for a 2 oz bag.

Legendary Vish Rebrands to Revo Foods, Plans to Host Tasting for 3D Printed Salmon Soon

When I last spoke to Robin Simsa, the CEO of Legendary Vish, the company was working on a prototype of a 3D printed plant-based salmon fillet. Now, the company has rebranded to Revo Foods, plans on launching three new products, and will host a tasting in March.

To hear about the details of Revo Foods’ recent news, I hopped on a Zoom call with Simsa this week. Simsa said the company rebranded to Revo Foods so they were not tied down to just producing fish alternative products. The company has now decided to prioritize other plant-based salmon products and one tuna product. Revo Foods wanted to focus first on products that could be consumed cold with no prep, but will still be working on the salmon fillet on the side.

The two products that will be launched by the company are plant-based smoked salmon strips and a smoked salmon spread. The main ingredients in these products include pea protein, citrus fiber, and algae oil, and 3D printing will not be used to create these products. Revo Foods will apply 3D printing techniques for the creation of its salmon sashimi, which uses similar ingredients to the previously mentioned products. The company has plans to work on a tuna product as well, but details are not made available yet.

As far as we know, Revo foods is the only company combining plant-based ingredients and 3D printing to produce alternative salmon products. US-based Sophie’s Kitchen produces smoked salmon lox using konjac as the main ingredient. Hooked, a Swedish start-up produces a shredded plant-based tuna. Other plant-based seafood companies like Good Catch and New Wave are focused on providing alternatives for other seafood species, like tuna and shrimp.

The plant-based salmon products from Revo Foods will be ready to launch around the summer of this year, and the company has partnered with several restaurants throughout Vienna, Austria for the launch. Revo Foods will be hosting a tasting of its plant-based salmon products on March 6 in Vienna.