Close Ad

The Spoon

Daily news and analysis about the food tech revolution

WPC

After More Than a Decade, Wireless Power For The Kitchen Is Set to Become a Reality

It has been almost a decade since we at The Spoon began covering efforts to establish a wireless power standard for the kitchen.

Our coverage started when the Wireless Power Consortium (WPC) released its first white paper announcing plans to bring wireless power to kitchen appliances. Until then, the consortium was primarily known for developing the Qi standard, which enabled wireless phone charging. However, in February 2017, WPC revealed its vision to extend this technology to blenders, mixers, and other small appliances, aiming to eliminate power cords.

Eight years is a long time, but the push for wireless power in the kitchen actually began nearly four years earlier, in 2013, when Philips and Haier urged WPC to explore a kitchen standard. It would take nearly four more years for the initiative to gain traction among WPC members.

Given the lengthy lead-up to developing a kitchen standard, it’s no surprise that when WPC formally announced its efforts in 2017, the group was (overly) optimistic about when products would hit the market. “We could be looking at products out next year,” Hans Kablau, head of the WPC Kitchen standard, told me at the time.

While those products didn’t arrive in 2018, they now appear to be finally arriving in 2025. After unveiling its first Ki-compliant products in 2024, Midea plans to launch its Celestial Flex Series—which includes a blender, steamer, and kettle—this year. The company has yet to announce pricing, but representatives at WPC’s CES booth confirmed they expect the products to ship in 2025..

You can watch a demo at the WPC booth below:

A Look at The Cordless Power Tech Coming to Market in 2025

Other early Ki products, equipped with integrated transmission coils, are expected to include induction cooktops. However, WPC envisions the technology being installed beneath various countertop surfaces in the long run. The Ki standard is designed to work with non-metal surfaces such as marble, slate, granite, laminate, and wood.

Given its decade-plus gestation period, it’s not surprising that other startups have also attempted to integrate wireless power into appliances and kitchen surfaces. Last year, I covered Cloen, a Spanish startup that developed Cloen Cordless Technology (CCT)—a dual induction plate system capable of both heating cook zones and wirelessly powering countertop appliances. Since last year, Porcelanosa has featured Cloen’s technology in custom-designed kitchen countertops and furniture. The company is also working on a line of cordless countertop appliances under the BeCordless brand.

Another company, Kitchenery, has also been developing wireless power transfer technology and cordless cooking appliances. At CES, Kitchenery debuted its induction kettle, aimed at the RV and marine industries. The company is also partnering with appliance brands and OEMs to integrate its power-receiving system into various products. Kitchenery expects to begin shipping its Quantum energy pad and silent blender this year.

Watch our interview with CEO Akshay Bhuva below.

Kitchenery at CES 2025

The emergence of wireless power for the kitchen reflects a broader trend: technology is receding into the background as kitchens become more streamlined and functional. Advancements in AI, voice and gesture interfaces, and miniaturization are driving this transformation. Now, after more than a decade of development, wireless power is poised to play a key role in this shift.

Midea Debuts First Countertop Appliances to Use Ki Wireless Power Standard

Seven years after the Wireless Power Consortium first started working on a standard for countertop kitchen appliances, Midea announced the first product that works with the Ki standard. According to a story in The Verge, Midea announced its Celestial Flex Series of products, which includes a blender, steamer, and kettle, at the IFA show in Berlin.

Midea, one of China’s largest appliance brands, hasn’t said when its Ki lineup will ship, pricing, or regions to which it will ship. It also has not indicated if they are working on a Ki-compliant cooktop, (though it wouldn’t matter much to customers since any Ki-compliant cooktop should work). However, they did announce a new all-in-one built-in oven called the Midea One that has a built-in air fryer and automated multi-step cooking function capabilities.

The announcement of the first products is a big milestone for any standard, and Ki is no exception. And while it’s good to see a major manufacturer commit to the standard, the better part of a decade is a pretty long time for a standard to finally make it to market, which is probably why—as we reported earlier this year—some companies have taken it upon themselves to build wireless power products that don’t use the standard.

It will be interesting to watch if Cloen or others who have attempted to build non-Ki-based wireless power kitchen products will now begin to embrace Ki. My guess is they will since proprietary technologies are an uphill battle, particularly when trying to convince retailers to jump on board.

Initial Ki products with integrated transmission coils are expected to be indication cooktops, but in the long term, WPC expects the technology to be installed under the counter on quartz, granite, and marble countertops.

SKS Hot Seat: WPC’s David Baarman Says the Future of The Kitchen is All About Simplification

As kitchens get smarter, they also tend to get more cluttered and complicated, especially if the various connected devices involved don’t communicate with each other. Wouldn’t it be nice if there was some sort of universal standard that allowed all smart appliances to be interoperable?

That’s exactly what the Wireless Power Consortium (WPC) is trying to achieve with its new Ki wireless power standard. The consortium works with over 600 companies to simplify the smart kitchen, making various connected devices simpler to use in tandem — and, of course, wireless.

We sat down with David Baarman, Co-Chairman of the Kitchen Application & Promotions Group at WPC, at SKS 2019 last week to ask a few questions about how his company is working to make the kitchen not only smart, but also simple to navigate. Check out the video below and be on the lookout for more videos from SKS 2019 to hit The Spoon soon!

SKS Hot Seat Interview: David Baarman, Wireless Power Consortium

Wireless Power Consortium Announces Ki Standard for Cordless Kitchen Power

The Wireless Power Consortium (WPC) today announced that its wireless power standard for kitchen appliances will be called Ki (pronounced “key”).

Wireless power in the kitchen would deliver just that, the ability to run appliances like coffee makers and toasters without the use of cords. With the Ki system, power transmitters are hidden under countertops and up to 2.2kW of electricity is delivered when Ki-compatible devices are placed on top of them.

From the WPC press release:

The Ki Cordless Kitchen standard works with any non-metal countertop or table surface, including marble, slate, granite, laminates, wood and many others. Enabled appliances communicate with the transmitter through near-field communication (NFC), a safe, inexpensive and pervasive technology currently used around the world in bankcards, door locks, passports, transport tickets, and more.

For safety, power does not transmit when other objects like keys or phones are placed on top of charging areas. This means that when not in use for powering devices, Ki-enabled countertops can be used for food preparation or eating.

You can see Ki wireless power in action in this Wireless Power Consortium video:

WPC Ki Cordless Kitchen Video

If the name “Ki” looks/sounds familiar, that’s because the WPC had previously developed the Qi wireless standard for charging things like mobile phones. The Qi standard is now part of 4,500 certified products in use today.

The WPC isn’t the only company working on wireless power. Powercast uses radio frequencies to wirelessly charge and power devices over the air.

The WPC said that its Ki-powered cordless kitchen will be on display at its booth at the IFA show in Berlin this week.

If Berlin is too far, you will also be able to see Ki in action next month at the Smart Kitchen Summit.

Wireless Power For The Kitchen On Display At CES 2018

If you’ve been to CES as much as I have, chances are you’ve walked by the booth of Wireless Power Consortium (WPC). That’s because the booth sits in one of the most highly trafficked spots in all of CES, sandwiched between the CNET interview booth and the press room, and is always packed to capacity every day of the trade show.

So as I happened by the WPC booth on today’s annual day-before-opening-day trip to the press room, I was excited to see a technician setting up a kitchen demo. Longtime readers of the Spoon know that the group is busy working on a wireless kitchen standard, one which takes the technology developed for things like wireless charging mats to recharge mobile phones and will put it directly into the a kitchen counter to power small appliances.

Crew setting up at the kitchen demo at the WPC booth

For those who were at the Smart Kitchen Summit, you might recall a demo of the same technology, since the SKS had the first public showing of the WPC working group’s kitchen effort. As one would expect for CES, this week’s demo is much bigger, featuring countertop appliances from Haier and Philips being powered by the WPC tech.

Under the surface of the counter resides magnetic power coil which then powers the appliance by coupling with a second coil in the appliance. You can see a pic of the power coil under one of the counters here:

Because the kitchen standard will use a different power level than that of Qi , users won’t be able to charge their phones from the same coil. However, as envisioned in the demo,  counters will have both Qi and the kitchen standard built in, allowing for scenarios with phone charging and appliance power directly from the counter. In the pic below, you can see a phone charging and a Philips proof of concept appliance drawing power from the kitchen counter.

Phone and appliance getting cordless power from the kitchen counter

Finally, they also showed me the Haier appliance powered by the WPC kitchen standard. You can see my video of that below.

With the Qi (pronounced “Chi”) wireless power charging standard becoming widely adopted, it’s exciting to see the WPC focusing their efforts on the cordless kitchen. While most of the tech and mainstream press have yet to hear about the WPC’s effort to push wireless power into the kitchen, I expect by the end of this year’s CES word will have gotten out and many more people will be talking about wireless power and the cordless kitchen.

The demo was codeveloped by the Wireless Power Consortium and Urbaneer, a developer of next-gen living concepts like the Bungalow based in Grand Rapids, Michigan. Urbaneer intends to build a series of living spaces using the wireless kitchen technology being developed by WPC.

Group That Brought Us Wireless Charging Wants To Do Away With Power Cords In The Kitchen

Appliance garage getting tangled up with power cords?

Not to worry. Eventually, those pesky power cables may some day be a problem of the past. That’s because the Wireless Power Consortium, the same group behind the Qi wireless charging standard, has set its sights beyond mobile phones and now hopes to change how appliances are powered in the kitchen.

Imagine A Cordless Kitchen

So what would a cordless kitchen look like? Not unlike those futuristic videos you’ve probably seen, one where everyday surfaces like kitchen countertops and tables can send power to products ranging from coffee makers to cookware.

In a white paper published by the WPC in February, the group highlights a few key use cases, two of which are illustrated in the artist rendering below.

Using cordless appliances on a kitchen counter. Image credit: Wireless Power Consortium/Philips

The first image on the left is one where a small kitchen appliance like a blender is powered without the need for a cable. In the second image on the right, the counter acts not only as a source of heat using induction heating, but also utilizes wireless power technology to enable communication between the cookware and the heat source to set the appropriate power for high-precision cooking.

How Does It Work?

How will wireless power in the kitchen work? Like the Qi standard for smaller devices like phones, the KWG will use induction charging, where a magnetic power coil (MPC) in the surface couples with a second coil in the appliance.

If you are familiar with induction heating for cooking, this utilizes the same induction power transfer concepts, only in this case instead of heating a pan or other piece of cookware, the power is converted back to electricity.

The KWG has settled on NFC as the primary communication technology in part because it is safer. One obvious safety benefit of NFC is the technology requires close proximity for communication, which means practically zero chance of an appliance communicating with the wrong transmitter.

A Long Cook Cycle

The history of the Wireless Power’s Kitchen Working Group (KWG) dates back to 2013 when consumer electronics giants Philips and Haier started pushing the WPC to look at developing a kitchen standard.

Four years later, the group is still busy plugging away and, while things are moving slowly, the group chaired by Hans Kaublau is still working towards a world where kitchen cords are a thing of the past.

Why are things moving so slowly?

According to Kablau, there are few reasons. One is it’s simply taken some time to get wireless power charging to the point where it can power appliances. Qi, the WPC’s first standard, took years to develop, starting in 2009 with 5W power requirement and in 2015 bumping that up to 15W capability (medium power). This year, the WPC hopes to enable charging of high power devices with 100W capability.

Second is it takes time to get buy in from all the major stakeholders. While Haier and Philips were there from the beginning, the group has yet to get buy in from appliance giants Whirlpool and Electrolux.

Another challenge may be a divided industry. There continues to be something of a wireless power standards battle going on, with the Airfuel Alliance developing a different set of technologies for wireless power that utilizes resonant charging, a technology that offers benefits over WPC’s inductive charging such as longer ranges for power transfer. The Airfuel Alliance, which is backed by technology powerhouses like Qualcomm and Samsung and battery giant Duracell, doesn’t have a kitchen-focused initiative, but does say the technology can be used for “kitchen applications”.

All of this still that hasn’t stopped the two founding companies of WPG’s Kitchen Working Group from working on prototypes. In 2016, Philips showed off a prototype on Fuji TV in Japan of an electric fryer with wireless power. You can see the video of the product in action below:

Cordless Kitchen Demonstration by Philips with Würth Elektronik Coils

The KWG is hoping to finalize the version 0.9 specification by the end of 2017. The specification has largely been defined but is currently being tested by the working group.

As a result, “we could be looking at products out next year,” said Kablau.

While I am excited for a future where we see cords go away and all our kitchen appliances are magically charged simply by setting them down on the counter, I suspect such a future is still a long way off.  One only has to look at how slow induction heating has been to take off in the US to see how resistant the traditional kitchen and appliance makers – as well as consumers – are to change.

Still, that doesn’t mean I’m not excited for the future of the cordless kitchen.  There are clear benefits of dropping power cords, whether it means a more orderly countertop or the greater safety of no cords on wet surfaces, and with cordless kitchen products debuting as soon as next year, it might be time for the industry and consumers to start getting excited as well.

If you want to hear Wireless Power Consortium Char Hans Kablau speak about the cordless kitchen, make sure to come to the Smart Kitchen Summit in October. Use the discount code SPOON for 25% off of tickets.